go-eCharger HOME+

The smart charging station can be installed in just a few steps - even without an electrician. Within seconds, it transforms into a mobile charging station for EV.

Plug & Play

Plug & Play

Mobile

Mobile

Wifi & Hotspot

Wifi & Hotspot

App

App

RFID

RFID

RCD Protection Module

RCD Protection Module

Charging Control

Charging Control

Photovoltaics

Photovoltaics

Load Balancing

Load Balancing

Scheduler

Scheduler

Flexible Energy Tariffs

Flexible Energy Tariffs

API

API

OCPP

OCPP

Discover

ALWAYS CONVENIENT CHARGING

Plug & Play - without an electrician

When you receive the go-eCharger HOME+ for the first time, it only takes a few minutes to start charging. Provided your building is equipped with a red CEE three-phase socket. Simply attach the wall bracket, hang up the charging station, connect it to the socket, plug in the type 2 cable and the charging process starts. That's Plug & Play.

Hand holding a cable plugged into a go-eCharger product.

ALWAYS CONVENIENT CHARGING

Flexible charging - even when travelling

With the go-eCharger HOME+, you are independent of public charging stations when you are on the road. Simply put it in the trunk when you need it. Then the mobile charging station will even charge your electric car or plug-in hybrid at friends' or acquaintances' homes, in holiday homes and at campsites. This guarantees you relaxed travel. With the optionally available adapters, you can also charge flexibly at the household socket, for example, if there is no suitable red CEE socket available.

Customer charging his electric car with a go-eCharger.

ALWAYS CONVENIENT CHARGING

Charge as fast as you wish

Your 11 kW or 22 kW go-eCharger automatically charges with the charging power requested by the vehicle. However, you can also set a lower charging power via a button on the device or app, e.g. to use electricity from the grid more sustainably or surplus electricity from your photovoltaic system more efficiently. With the go-eCharger, your possibilities are unlimited.

Charging status of an electric car seen from the drivers position.

ALWAYS CONVENIENT CHARGING

Safety as a top priority

The go-eCharger HOME+ is equipped with numerous extras that give you the highest sense of security at all times. For example, your charging station regulates the current flow downwards if necessary, or the RCD protection module switches the charger off completely in the event of fault currents (DC fault protection). With this and other safety functions, we reliably protect everything you hold dear.

Family selfie time on a carpet.
DotsCircle
Go-e charger

OUR PRODUCT

Everything You Need to Charge Smart

Female go-e customer charging car

The go-eCharger HOME+ is suitable for charging all electric vehicles and plug-in hybrids of any car brand available in Europe. Thanks to the built-in type 2 socket, the wallbox is extremely compact and works with any standard type 2 charging cable.

OUR PRODUCT

Everything You Need to Charge Smart

Female go-e customer charging car

Charge your car with minimum harm to the environment. With the integrated scheduler or by using flexible electricity tariffs automated by the Charger, you can charge when electricity is abundant. This reduces the load on the electricity grid and can also pay off financially.

OUR PRODUCT

Everything you need to charge clever

Female go-e customer charging car

You can add several WiFi networks to your charging station. Say the one in your home and the one in the office. Every time you use the charger in one of these locations, you will be able to control it remotely via the app.

Colorful beanstalk

Even smarter charging

Smart Charging with go-e App

go-e app
  • Free download
  • Monitor and change charging status at any time
  • Adapt charging processes to personal requirements
  • Personalisation, authorisation and reading electricity metre
  • Many other smart comfort and security settings
  • Available in nine languages

Download here:

SeparationLines

HARDFACTS

Technical Specifications

Technicial Specification

Maximum charging power

2 variants: 11 kW or 22 kW

Configurable charging current

6 A to 16 A (11 kW)

6 A to 32 A (22 kW)

in 1 A steps via app or

in 5 steps by push button

Rated voltage

230 V (single phase) / 400 V (three phase)

1-/3-phase switching via app (from hardware version V3)

Control, amperage and status display

Button, app (local hotspot or worldwide via WLAN),

Indication via LED and app

Security

Indoor and outdoor installation

RCD protection module with direct current detection

Locking of the charging cable

RFID access control

Comfort and sustainability

Electricity meter (log via app download)

RFID chip management

Scheduler

Flexible electricity tariffs

Eco mode / planned charging mode

Static load balancing

Photovoltaic connection via API

Mains connection

30 cm cable, 5 x 2.5 mm² + plug CEE red 16 A (11 kW)

30 cm cable, 5 x 6 mm² + plug CEE red 32 A (22 kW)

Optional adapters for other sockets

Dimensions

Approx. 15 x 25 x 9 cm

Interfaces, communication protocols

HTTP API (Local + Cloud), MQTT,

OCPP 1.6, Modbus TCP, Network operator API

Weight

Approx. 1.69 kg (11 kW)

Approx. 2.91 kg (22 kW)

Calculate Your Charging Time

Car Charging

Determination of approximate values when charging from 0 to 100 %: actual charging time and charging speed may deviate due to rounding differences and external influences. Charging power when charging via household plug is always limited to 2.3 kW. Errors excepted.

 
 
 

Adapter

Estimated charging time

7.57h

Maximum charging output

7.4kW

Compare our products

go-e Charger in Comparison

Want to see the main distinctions between go-eChargers? Select the models you would like to compare and find the charger that suits you best.

 
 
product_page.compare_products.gemini_flex_11kw.title

go-e Charger Gemini flex 11 kW

Dimensions

Approx. 15.5 x 26 x 11 cm

Weight

Approx. 1.63 kg

Rated voltage

230 V / 240 V (single-phase) or 400 V / 415 V (three-phase)

1-/3-phase switching via app

Mains connection

30 cm cable, 5 x 2.5 mm² + plug CEE red 16 A

Configurable charging current

6 A to 16 A

IP Protection class

IP55

Other functions

Identical for all products of the go-eCharger HOME series (from V3) and go-e Charger Gemini series

product_page.compare_products.gemini_flex_22kw.title

go-e Charger Gemini flex 22 kW

Dimensions

Approx. 15.5 x 26 x 11 cm

Weight

Approx. 1.82 kg

Rated voltage

230 V / 240 V (single-phase) or 400 V / 415 V (three-phase)

1-/3-phase switching via app

Mains connection

30 cm cable, 5 x 6 mm² + plug CEE red 32 A

Configurable charging current

6 A to 32 A

IP Protection class

IP55

Other functions

Identical for all products of the go-eCharger HOME series (from V3) and go-e Charger Gemini series

Haven't found what you're looking for yet?

In the go-e shop you will find more detailed information on all products and accessories.

SeparationLines
Colorful beanstalk

You Want to Become a Reseller?

We have all the information you need for your partnership with go-e. Please contact our support if you have any questions.

Beanstalk in background

go-e newsletter subscription

Stay informed about go-e and the latest developments and innovative solutions in e-mobility and charging technology.

  
Colorful beanstalk

Any questions? We will be happy to advise you!

Write to us directly or contact our phone support.

 
 
 
 
 

 
SeparationLines